California’s Proposition 65 entitles California consumers to special warnings for products that contain chemicals known to the state of California to cause cancer and birth defects or other reproductive harm if those products expose consumers to such chemicals above certain threshold levels.  We are providing the following warning for products linked to this page:



 This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.


For more information visit

LIC Motorsports Carbon Primer Rear Sedan Fender Flares (02-07 WRX/STi)


The LIC Motorsports rear carbon w/ primer finish fender flares have arrived. Weighing in at only 4-8oz each (varies per part)...yes I said that properly; a total of 1-1.5 lbs for the rear set.  These are a 35mm offset flare that will accommodate up to a 295 tire (using a 18x10 e35 offset wheel).  Method of attachment couldn't be simpler for this fantastic product; there is no cutting, drilling, or modifications needed to mount these flares directly onto your vehicle.  This product is attached simply using race grade 3M adhesive tape, which is plenty to hold on this lightweight durable product.  Parts need paint.  *Tape not included with purchase.

We dont' offer a "How to Install" because there is lots of variables that need to be taken into consideration and it's not an easy 1-2-3 process that will be the same for everybody.  Also other wheel/tire fitments are possible to make work, here is what a customer did for install with his setup and what we recommended if being used for track purposes and/or agressive fitments: bhamblin's 2006 WRX


  • The flares manufactured for LIC Motorsports are furnished in a commercial grade finish and are about 95% ready to paint. They are exact copies of the components that were built on our own car. The components are made as two separate pieces and are assembled to create one finished component.  There is an assembly line at the top of the component that will require a small amount of attention to achieve perfect detail prior to paint.
  • The Carbon fiber components are of similar finish. There is a small amount of very thin fiberglass used in the construction to achieve a more perfect finish out of the mold. Overall, the parts are still about 90% Carbon fiber.



  • Fitment: 02-07 WRX/STi


*These are typically in stock and ship same day but if not in stock and need to be built to order, the time frame once ordered is 2-3 weeks

Related Downloads:



Hmm, do you guys think this will work with 18x10 +30 with 255/35 tires?

LIC Response

Back when these were available, I wouldn't foresee a fitment issue. We used to run 18x10 +30 with 285's

flare fitment and front flares

two questions firstly do you sell matching front flares? secondly to fit the much larger rims properly ,without rubbing etc do you need to modify the guards ,especially on a car that is lowered?

LIC Response

we don't offer matching fronts, we suggest a wider fender replacement for the front. For it to function properly (and not just be for looks), yes you will need to modify the arch area to ensure no rubbing of the inner tub area.

Customers who bought this product also bought